3 Series E92 316i (N43) COUPE
11 51 000
Removing and installing/replacing coolant
pump (N43B16)
Warning!
Danger of scalding!
Only perform these tasks on an engine that has cooled down.
Recycling:
Catch and dispose of drained coolant.
Observe country-specific waste-disposal regulations.
Important!
If a coolant pump which has already been operated is reused,
it must be filled immediately after being removed with coolant
(mixture ratio 1:1 / water: coolant).
Necessary preliminary tasks:
•
Drain coolant.
•
Remove coolant thermostat.
RA Removing and installing/replacing coolant pump (N43B16)
BMW AG - TIS
20.01.2013 10:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
