3 Series E92 316i (N43) COUPE
Release screws (1).
Tightening torque: 11 71 2AZ
.
If necessary, remove exhaust-gas recirculation pipe (2).
Disconnect plug connection (3) on exhaust-gas recirculation
valve.
Release screws (4).
Tightening torque: 11 71 1AZ
.
Remove exhaust-gas recirculation valve (1) in direction of arrow.
Installation:
Replace O-ring.
Assemble engine.
Vent cooling system and check for leaks.
RA Removing and installing/replacing exhaust-gas recirculation valve (N43)
BMW AG - TIS
20.01.2013 10:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -