bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

10 RA Removing And Installing_replacing Left Or Right Toe Arm|Page 1268 > < 9 RA Removing And Installing_replacing Tension Strut
Page 1
background image

33 32 180

Removing and installing/replacing left or right
toe arm

Note:

If the toe arm is detached from the rear axle carrier/wheel carrier,
it is necessary after reinstallation to carry out a wheel/chassis
alignment check.

Necessary preliminary tasks:

Remove rear wheel

If necessary, open cover (1) on stoneguard (2).

Mark position of eccentric screw to rear axle carrier.

Release screw.

Installation:

If necessary, turn toe arm by hand.

Tightening torque  33 32 8AZ

.

RA  Removing and installing/replacing left or right toe arm

BMW AG - TIS

20.01.2013  12:18

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

10 RA Removing And Installing_replacing Left Or Right Toe Arm|Page 1268 > < 9 RA Removing And Installing_replacing Tension Strut