3 Series E92 316i (N43) COUPE
Preparation of new part:
Mark severance cut (1) in accordance with measurement and
cut.
Important!
Cut outer metal sheet only.
Measurement a=170 mm
Measurement b = 110 mm
Installation:
Weld in reinforcement plates at severance cuts.
Preparation of new part:
Open weld joints in area (2).
Installation:
The cut part is not needed.
Preparation of new part:
Open weld joints in area (1).
Mark severance cut (2) in accordance with vehicle and cut.
Important!
Cut outer metal sheet only.
Preparation of new part:
Open weld joints in areas (1).
RA Replacing luggage compartment floor (complete with left or right inner wheel arc
BMW AG - TIS
20.01.2013 13:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
