3 Series E92 316i (N43) COUPE
Note:
Start by unclipping door trim panel (1) at bottom.
Release clips (2) for door trim panel (1) with special tool
00 9 317 .
Important!
On version with light package, pay attention to fibre-optic
waveguide in area of door mirror.
Carefully unclip door trim panel (2) at top from retainers (1).
Unhook Bowden cable (1) from door lock (2).
Disconnect all plug connections/cable holders and remove door
trim panel.
Installation:
If necessary, replace faulty clips.
Fit all clips with sealing ring.
Make sure clips are installed in correct position.
1
Grey clip
2
White clip
3
Red clip
RA Removing and installing left or right front door trim panel
BMW AG - TIS
20.01.2013 14:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -