3 Series E92 316i (N43) COUPE
51 43 148
Removing and installing or replacing trim on
left or right door pillar (top)
Necessary preliminary tasks:
•
Remove rear side trim panel
Lever out cap (1).
Release screw (2) and detach seatbelt strap.
Tightening torque 72 11 5AZ
.
Installation:
Check that spacer bushing (3) and rubber ring (4) are in correct
position.
Detach mucket (1) in area of panel (4).
Release panel (4) at clip (2).
Feed out panel (4) in direction of arrow from door pillar.
Feed out seatbelt strap (3) and remove panel (3).
Installation:
Clip (1) and guide (2) of panel (3) must not be damaged.
RA Removing and installing or replacing trim on left or right door pillar (top)
BMW AG - TIS
20.01.2013 14:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
