bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

45 Instrument Cluster Trim Panel > < 3 RA Removing And Installing _ Replacing Roofliner (with Slide_tilt Sunroof)
Page 2
background image

Important!

When removing, do not touch edges of roofliner.

The following tasks must be carried out with a second person
assisting:

Move seat backs of both front seats to max. rear position.

Release expander rivets (1).

Detach roofliner (2) from Velcro-type fasteners (3).

Detach roofliner (2) from clips (4).

Detach mucket (6) towards inside.

Detach mucket (5) from all doors in area of roofliner (2).

Lay roofliner (2) downwards.

Tilt roofliner and remove to front passenger door.

Installation:

Following parts of roofliner must not be damaged or missing:

Mounting and frame (1) for front mounting bracket

Wiring harness (2)

Mounting and frame (3) for rear mounting bracket

Velcro-type fasteners (4)

Clips (5).

Installation:

Installation sequence:

1. 

Secure roofliner with mucket

2. 

Secure roofliner in middle to Velcro-type fastener

3. 

Snap roofliner into clips at rear

4. 

Insert expander rivets at front

5. 

Screw down grab handles at front on left/right

6. 

Screw down sun visors and counter supports

7. 

Add final details to vehicle

RA  Removing and installing / replacing roofliner (with slide/tilt sunroof)

BMW AG - TIS

20.01.2013  14:21

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

45 Instrument Cluster Trim Panel > < 3 RA Removing And Installing _ Replacing Roofliner (with Slide_tilt Sunroof)