bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing_replacing Flywheel - Automatic (N47, N47S)|Page 329 > < 2 RA Replacing All Main Crankshaft Bearing Shells (N47, N47S)|Page 326
Page 1
background image

11 22 000

Removing and installing/replacing flywheel -
automatic (N47, N47S)

Special tools required:

11 4 180

11 9 260

11 9 263

11 9 264

11 9 265

Necessary preliminary tasks:

Disconnect battery negative terminal.

Remove and install front assembly underside protection.

Remove and install complete exhaust system.

Remove and install reinforcing plate.

Remove and install transmission.

Manual transmission.

Secure flywheel with gearbox bolt (1) and special tools 
11 9 260  / 11 9 265 .

Release flywheel screws with special tool 11 4 180 .

Tightening torque: 11 22 2AZ

.

Automatic gearbox.

Fix flywheel (1) in position with special tools  11 9 260  / 
11 9 263  /  11 9 264 .

Unfasten flywheel screws.

Tightening torque: 11 22 1AZ

.

RA  Removing and installing/replacing flywheel - automatic (N47, N47S)

BMW AG - TIS

21.01.2013  01:59

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing_replacing Flywheel - Automatic (N47, N47S)|Page 329 > < 2 RA Replacing All Main Crankshaft Bearing Shells (N47, N47S)|Page 326