3 Series E92 320d (N47) COUPE
Tighten camshaft bolts (1).
Tightening torque: 11 31 1AZ
.
Turn over engine twice with special tool 11 6 480 up to ignition
TDC position of cylinder No. 1.
Check camshaft setting.
Important!
Do not turn the engine back.
Assemble engine.
RA Replacing inlet camshaft (N47, N47S)
BMW AG - TIS
21.01.2013 02:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
