3 Series E92 320d (N47) COUPE
Remove protective cap of timing case cover.
Block crankshaft in firing TDC position of cylinder no. 1 with
special tool 11 5 320 .
Release chain tensioner (1).
Release screws (1).
Remove chain sprocket from assembled shaft and feed out of
timing chain.
Place timing chain in cylinder head.
Note:
Both camshafts can be removed with the camshaft carrier.
Release all bolts (1) from outside inwards.
RA Removing and installing/replacing all hydraulic valve clearance compensating ele
BMW AG - TIS
21.01.2013 02:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -