3 Series E92 320d (N47) COUPE
11 43 000
Removing and installing/replacing guide tube
for dipstick (N47, N47S)
Necessary preliminary tasks:
•
Remove pressure pipe at throttle valve.
•
Disconnect plug connection at preheater control unit.
Release screw (1).
Cut cable tie (2).
Cut open cable tie (1).
Remove guide tube (2) in direction of arrow.
Installation:
Replace O-ring.
Assemble engine.
Check engine oil level, correcting if necessary.
RA Removing and installing/replacing guide tube for dipstick (N47, N47S)
BMW AG - TIS
21.01.2013 02:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
