3 Series E92 320d (N47) COUPE
Release screws (1).
Remove pressure accumulator.
Installation:
Tightening torque 13 53 2AZ
.
Assembly sequence, high-pressure system:
1. Insert pressure accumulator
2. Clip all high-pressure lines up to head
3. Clip pressure accumulator mountings and screw down
4. Tighten down high-pressure lines on injectors
5. Tighten down high-pressure lines on pressure accumulator side
6. Tighten down high-pressure line on high-pressure pump
RA Removing and installing/replacing pressure accumulator of injection system (N47)
BMW AG - TIS
21.01.2013 02:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
