3 Series E92 320d (N47) COUPE
Release knurled screws (2) and remove special tool 21 2 180
from SAC clutch.
Withdraw special tool from clutch plate with aid of accompanying
screw (1).
Installing new SAC clutch:
Installation:
N52
Screws must be replaced.
Jointing torque and angle of rotation must be observed without
fail.
Important!
Handle clutch disk carefully, do not touch surfaces of friction
pads.
Install clutch plate (1) in correct position.
Note designation for "engine side" / "transmission side".
RA Removing and installing or replacing clutch (SAC 240)
BMW AG - TIS
21.01.2013 02:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -
