3 Series E92 320d (N47) COUPE
Crank engine with special tool 11 6 480 at vibration damper in
direction of rotation.
Release bolt (1) of torque converter with special tool 24 1 110 .
Crank engine further and release remaining 5 bolts.
Tightening torque 24 40 1AZ
.
Supporting transmission:
Support with special tools 23 4 050 , 23 0 132 and 00 2 030 .
Tasks are described in Transmission bracket.
Secure transmission on lifter with tensioning strap.
Unfasten screws (1) and nuts (2).
Remove transmission cross-member.
Tightening torque 24 71 1AZ/7AZ
.
Lower engine towards rear, lock between oil sump and steering
with a suitable block (1) or workshop jack.
RA Removing and installing automatic transmission (6HP19Z) N47
BMW AG - TIS
21.01.2013 03:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -