3 Series E92 320d (N47) COUPE
33 32 165
Removing and installing/replacing tension
strut
Important!
Observe safety instructions for raising the vehicle.
Driving without the tension strut is not permitted!
Release screws (1, 3).
Remove tension strut (2).
Installation:
Tightening torque 33 32 11AZ
(to body).
Tightening torque 33 32 12AZ
(to compression strut).
RA Removing and installing/replacing tension strut
BMW AG - TIS
21.01.2013 04:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
