3 Series E92 320d (N47) COUPE
41 14 502
Replacing rear left outer wheel arch section
(rear left side panel removed)
Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 14 502).
Spot-weld bonding is used on this vehicle. Observe specific
procedure.
Remove or cover those vehicle components in the repair area
which are susceptible to heat or dust.
Use only approved spot-welding apparatus for repairs!
Following new body parts are required (refer to EPC):
-
(1) Wheel arch, outer, rear
-
(2) C-pillar reinforcement
-
(3) Shaped part, B-pillar (not shown)
-
(4) Shaped part, wheel arch, front (not shown)
-
(4) Shaped part, wheel arch, rear (not shown)
Mark severance cut (1) in accordance with measurement and cut.
RA Replacing rear left outer wheel arch section (rear left side panel removed)
BMW AG - TIS
21.01.2013 05:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -