3 Series E92 320d (N47) COUPE
51 16 200
Removing and installing storage
compartment
Necessary preliminary tasks:
•
Remove trim for storage compartment
•
Remove rear console
Lever out covers (1) and release screws underneath.
If necessary, detach cable from storage compartment.
Unscrew nuts (1).
Depending on equipment specification, disconnect plug
connections (2).
Installation:
Ensure correct cable routing.
Pull off gaiter (1) towards top.
Detach plug connection (2) from holder and disconnect plug
connection (2).
RA Removing and installing storage compartment
BMW AG - TIS
21.01.2013 05:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
