3 Series E92 320d (N47) COUPE
72 11 030
Removing and installing or replacing front
seat belt
Necessary preliminary tasks:
•
Remove panel for door post
Note:
If a seat belt which is damaged due to an accident is
exchanged, check the slide bar for damage (bending) and
replace if necessary.
Lever out cap (1).
Release screw (2).
Tightening torque 72 11 05AZ
.
Installation:
Check that spacer bushing (3) and rubber ring (4) are in correct
position.
Release screws (1).
Tightening torque 72 11 04AZ
.
Installation:
E81 only:
If screws (1) slip, use 6 mm dia. repair screws.
Tightening torque 72 11 04AZ
.
Remove deflection bracket (2).
Release screw (3).
Tightening torque 72 11 03AZ
.
Remove belt deflection fitting (4).
RA Removing and installing or replacing front seat belt
BMW AG - TIS
21.01.2013 10:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -