3 Series E92 325xi (N53) COUPE
51 11 ...
Removing and installing/replacing cover for
headlight washer system on left
Special tools required:
•
00 9 340
Important!
Risk of damage!
Cover for headlight washer system is spring-mounted.
Pulling out the cover too quickly or with excessive force may
cause the springs to be overelongated.
If the springs are overelongated, the cover for the headlight
washer system may rattle on the bumper.
Lever out cover (1) with special tool 00 9 340 .
Slowly pull out spray nozzle (1) from cover (2) until nozzle (1)
can be gripped with pliers (3), grip nozzle (1) by rib and pull out.
Release catches (4) and remove cover (2).
Allow nozzle (1) to slide back slowly.
Installation:
To pull out nozzle (1), position pliers (3) on rib only (see picture).
RA Removing and installing/replacing cover for headlight washer system on left
BMW AG - TIS
28.01.2013 07:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -