3 Series E92 328xi (N52K) COUPE
27 10 720
Replacing servomotor (ATC 300)
Important!
After replacement, the "Repair" service function must be
carried out with GT1.
Disconnect plugs (1 and 2).
Release screw (3) and turn resistor counterclockwise.
Tightening torque 27 00 14AZ
.
Release screws (1) and remove servomotor from transfer case.
Tightening torque 27 00 13AZ
.
RA Replacing servomotor (ATC 300)
BMW AG - TIS
05.02.2013 13:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
