bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Replacing Trim For Oddments Tray (back Shelf With Rear Window Roller Blind) > < 1 RA Removing And Installing_replacing Cover For Rear Left Or Right Seat Belt
Page 1
background image

51 46 001

Removing and installing panel for rear
window shelf (parcel shelf)

Necessary preliminary tasks:

Remove left/right trim panel for roof pillar (C-pillar)

Remove rear mid-range speaker on left/right

Remove all Top Tether eyelets for child seat

Remove cover for seat belts on left/right

Remove left/right armrest side sections

Version with roller sun blind:

Release screws (1).

Tightening torque 51 46 3AZ

.

Installation:

Make sure guide pin (2) is correctly seated.

Version with roller sun blind:

Disconnect plug connection (1).

Remove supports (1).

Release clips (2) and carefully feed out rear parcel shelf (3)
towards front.

Installation:

Make sure rear parcel shelf is correctly seated in rear grille.

RA  Removing and installing panel for rear window shelf (parcel shelf)

BMW AG - TIS

05.02.2013  18:27

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Replacing Trim For Oddments Tray (back Shelf With Rear Window Roller Blind) > < 1 RA Removing And Installing_replacing Cover For Rear Left Or Right Seat Belt