3 Series E92 330i (N53) COUPE
Note:
N53 only
Remove cable from holders (1).
Unfasten screws (1) and nuts (2).
Remove transmission cross-member.
Tightening torque 24 71 1AZ/2AZ
.
-
Remove propeller shaft from transmission.
-
Release centre bearing.
-
Tie propeller shaft to one side.
Tasks are described in Removing propeller shaft.
Release screw (1).
Disconnect hydraulic lines (2) to transmission fluid cooler.
Installation:
Replace sealing rings.
RA Removing and installing automatic transmission (6HP19Z) N52/N52K/N53
BMW AG - TIS
09.02.2013 22:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
