3 Series E92 330i (N53) COUPE
34 11 Front Brake E92
Different thicknesses on brake linings
max. mm
0.01
Surface roughness of braking surfaces
(precision-turned)
Ra
µ
The brake discs must always be assigned by way of the relevant vehicle
identification number and the Electronic Parts Catalogue (ETK)!
New brake pads may only be installed if the brake disk thickness is greater
than or equal to the minimum brake disc thickness (MIN TH).
Brake disc diameter
Models:316i; 320i; 320d; 323i; 328i
mm
300
Brake disc diameter
Models:325i; 330i N52;
mm
330
Brake disc diameter
Models:330i N53; 330d; 335i; 335d;
mm
348
Brake disc diameter
Models: M3
mm
360
Wear warning from residual lining thickness
mm
3.0
Brake disk minimum thickness (MIN TH) stamped on
brake disk body
Models:316i; 320i; 320d; 323i; 325i; 330i N52; 328i
mm
22.4
Brake disk minimum thickness (MIN TH) stamped on
brake disk body
Models: 330i N53; 330d; 335i; 335d; M3
mm
28.4
Max. machining limit per friction ring side (M models must
not be machined!)
mm
0.8
TD Front Brake E92
BMW AG - TIS
10.02.2013 14:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -