3 Series E92 335i (N54) COUPE
22 11 001
Replacing right engine mount (N54)
Necessary preliminary tasks:
•
Secure engine in installation position
•
Remove underbody protection
•
Release tie rod on steering gear
•
Remove right V-strut (E93 only)
Release screws (1).
Remove heat shield (2).
Release bolts (1) and remove engine mount towards front.
Tightening torque 22 11 1AZ
.
Installation:
Make sure rubber (1) is correctly located.
RA Replacing right engine mount (N54)
BMW AG - TIS
18.02.2013 20:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
