3 Series E92 335xi (N54) COUPE
Remove propeller shaft.
Release screw (1).
Disconnect hydraulic lines (2) to transmission fluid cooler.
Installation:
Replace sealing rings.
Release nut (1) and bracket from transmission oil lines on oil
sump.
Crank engine at vibration damper in direction of rotation until
screw (1) is visible in opening.
Release all screws of torque converter with special tool
24 1 110 .
Crank engine further and release remaining 5 bolts.
Tightening torque 24 40 1AZ
.
RA Removing and installing automatic transmission (GA6HP19Z) N54
BMW AG - TIS
20.02.2013 07:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
