3 Series E92 M3 (S65) COUPE
Mounting engine on assembly stand (S65)
Special tools required:
•
00 2 300
•
11 5 260
Necessary preliminary tasks:
•
Remove engine.
•
Remove rear water pipe.
Secure special tool 11 5 260 to crankcase with bolts (2).
Tighten bolts (2) evenly.
Note:
Bolts (1) are not required on the S65.
Secure engine with special tool 11 5 260 to special tool
00 2 300 .
Note:
Picture shows S85.
RA Mounting engine on assembly stand (S65)
BMW AG - TIS
21.02.2013 18:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -