3 Series E92 M3 (S65) COUPE
11 12 105
Removing and installing left cylinder head
(S65)
Special tools required:
•
11 2 250
Necessary preliminary tasks:
•
Remove exhaust system.
•
Remove left exhaust manifold.
•
Remove left cylinder head cover
•
Remove left inlet camshaft.
•
Remove left exhaust camshaft.
•
Partially unfasten engine wiring harness and lay to one side.
•
Remove throttle valves from cylinders 5 to 8.
•
Remove thermostat housing.
•
Remove rear water pipe from cylinder head.
Release screws (1).
Remove water fitting (2).
Installation:
Replace seal.
RA Removing and installing left cylinder head (S65)
BMW AG - TIS
21.02.2013 18:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -