3 Series E92 M3 (S65) COUPE
11 23 010
Removing and installing/replacing vibration
damper (S65)
Special tools required:
•
00 9 120
•
11 0 280
•
11 9 260
•
11 9 263
Necessary preliminary tasks:
•
Remove fan cowl with electric fan.
•
Remove A/C compressor drive belt.
•
Remove alternator drive belt.
Release screws (1).
Remove cover (2) with belt pulley (3).
Note:
Engine or transmission removed.
Secure special tool 11 9 260 to flywheel (1).
Screw in special tool 11 9 263 with bolt (2) on crankcase.
RA Removing and installing/replacing vibration damper (S65)
BMW AG - TIS
21.02.2013 18:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
