3 Series E92 M3 (S65) COUPE
11 36 720
Removing and installing/replacing solenoid
valves on right VANOS adjustment unit (S65)
Necessary preliminary tasks:
•
Remove intake manifold (inlet solenoid valve only).
Disconnect plug connection (2) on solenoid valve for exhaust
adjustment.
Release screw (1).
Remove exhaust solenoid valve.
Installation:
Replace O-rings.
Disconnect plug connection on solenoid valve for inlet
adjustment.
Release screws (1).
Remove inlet solenoid valve (2).
Installation:
Replace O-ring.
Assemble engine.
Perform VANOS test.
RA Removing and installing/replacing solenoid valves on right VANOS adjustment unit
BMW AG - TIS
21.02.2013 18:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -