3 Series E92 M3 (S65) COUPE
12 63 520
Replacing DME master relay (S65)
Necessary preliminary tasks:
•
Switch off ignition
•
Open electronics box, refer to Removing control unit
Remove DME master relay (1).
Notes on troubleshooting:
If the starter motor cranks the engine during the starting sequence
but the engine fails to fire, then:
1.
Check engine fuses
2.
If the fuses have blown, replace them completely with the
fuse holder
3.
Find out why fuses have blown
Continue troubleshooting as per DIS instructions.
RA Replacing DME master relay (S65)
BMW AG - TIS
21.02.2013 19:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
