3 Series E92 M3 (S65) COUPE
17 11 150
Removing and installing/replacing engine oil
cooler (S65)
Necessary preliminary tasks:
•
Remove front bumper trim
Remove front underbody protection
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Recycling:
Engine oil escapes when oil lines are released. Catch and dispose
of emerging engine oil.
Observe country-specific waste-disposal regulations.
Slacken nut (1).
Detach oil line from engine oil cooler.
Catch and dispose of escaping oil.
Installation:
Replace sealing ring.
Unscrew screws (2).
RA Removing and installing/replacing engine oil cooler (S65)
BMW AG - TIS
21.02.2013 20:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -