3 Series E93 320i (N43) CONVER
51 12 156
Removing and installing rear bumper trim
Necessary preliminary tasks:
•
Remove left/right rear light
Lever out cover (1) and release screw underneath.
Release screw (1) on left/right.
Bend wheel arch trim (2) in area (A) to one side and release
screw (3) on left/right.
Release screws (1 to 3).
RA Removing and installing rear bumper trim
BMW AG - TIS
22.01.2013 04:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -