3 Series E93 320i (N46T) CONVER
51 23 211
Removing and installing/replacing cable for
front engine hood locks (to passenger
compartment)
Necessary preliminary tasks:
•
Remove footwell side trim panel
•
Remove lower section of microfilter housing on left.
Disengage Bowden cable (1) from release lever (2) and feed out
in direction of arrow.
Release expander rivet (1) and nut (2).
Feed out water channel (3) towards top.
Installation:
Make sure water channel (3) is correctly seated.
RA Removing and installing/replacing cable for front engine hood locks (to passenge
BMW AG - TIS
24.01.2013 00:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -