3 Series E93 320i (N46T) CONVER
Mark tensioning strap on one side before retainer.
Open retainer (1).
Replacement only:
Roof shell in middle in "closed" position, convertible top
compartment lid open.
Feed tensioning strap into reversing lug and pull until roofliner
contacts seal.
Turn tensioning strap over into a loop and crimp retainer (1).
Installation:
Replace faulty retainer.
Insert tensioning strap (1) with marking in positioner (2) of
special tool 54 0 230 .
If necessary, adjust measured length (see above).
Insert new retainer (1) in special tool
54 0 230 and crimp.
Feed tensioning cable (1) out of guide (2).
RA Removing and installing or replacing roofliner for roof shell in middle
BMW AG - TIS
24.01.2013 01:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
