3 Series E93 320i (N46T) CONVER
Slacken lock nuts (1) with special tool 54 0 190 .
Tightening torque: 54 37 24AZ
.
Turn barrel screws back with special tool 54 0 180 .
Installation:
Tighten barrel screws with special tool 54 0 180 in conjunction
with 00 9 450 .
Tightening torque: 0.2 Nm (= 20 cNm) .
Release screws (1) on left and right coupling fasteners.
Installation:
Bushing (1) stretches as screw (2) is tightened against coupling
fastener (3).
Tightening torque: 54 37 12AZ
.
Gauge, coupling fastener:
RA Gauging coupling fastener (without removing and installing roof module)
BMW AG - TIS
24.01.2013 01:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -