3 Series E93 323i (N52K) CONVER
Release screws (1).
Remove load protective plate on left and right.
Note:
For right load protective plate, remove control unit if necessary.
Warning!
Risk of injury!
Fit special tool 54 0 220 to prevent unintentional triggering
of rollover protection system.
Release left and right screws (1).
Tightening torque: 54 37 13AZ
.
Slacken lock nut with special tool 54 0 190 .
Turn back barrel screws by approx. 3 mm.
Tightening torque: 54 37 22AZ
.
Installation:
Tighten barrel screws only with special tool 54 0 180 together
with 00 9 450 .
Release screws (1) on left and right coupling fasteners.
Tightening torque: 54 37 12AZ
.
RA Removing and installing roof module
BMW AG - TIS
25.01.2013 11:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
