3 Series E93 325d (M57T2) CONVER
11 28 010
Removing and installing / replacing alternator
drive belt (M57T2)
Necessary preliminary tasks:
•
Remove fan cowl
•
Remove A/C compressor drive belt
Check drive belt for coolant and oil residues, replace if necessary.
Important!
The drive belt must be replaced if it is contaminated with
hydraulic fluid.
Note:
If the drive belt is to be reused, mark direction of travel and
reinstall drive belt in same direction of rotation.
Important!
Belt tensioner is under spring pressure.
Press belt tensioner (1) back in direction of arrow.
Remove drive belt (2).
RA Removing and installing / replacing alternator drive belt (M57T2)
BMW AG - TIS
25.01.2013 16:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -