3 Series E93 325d (M57T2) CONVER
11 52 020
Removing and installing/replacing fan clutch
(M57T2)
Special tools required:
•
11 5 040
Necessary preliminary tasks:
•
Remove fan cowl
Important!
Do not damage radiator fins.
The fan clutch is secured to the water pump with a left-hand
thread.
To release fan impeller:
-
Grip water pump at square drive.
-
Detach fan impeller with special tool 11 5 040 .
Installation:
Tightening torque 11 52 1AZ
.
Installation:
When using special tool 11 5 040 , 30 Nm on the torque
wrench scale are equivalent to a tightening torque of 40 Nm.
Attach special tool, as illustrated, to torque wrench.
RA Removing and installing/replacing fan clutch (M57T2)
BMW AG - TIS
25.01.2013 17:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -