3 Series E93 325d (M57T2) CONVER
•
Unlock and disconnect plug (1) by turning.
•
Insert special tool 24 2 390 in sealing sleeve (do not touch
pins)
•
Release cable from retainers
These tasks are described in Notes on mechatronics
Important!
Read and comply with important note.
Release screw (1).
Remove metal plate (2).
Note:
Illustration similar.
Crank engine at vibration damper with special tool 11 6 480 in
direction of arrow until bolt (1) is visible in opening.
Release all screws of torque converter with special tool
24 1 110 .
Tightening torque 24 40 1AZ
.
Prepare special tool (1)
24 4 160 with shaped section (2)
24 4 165 side (A) to (A).
On E93 use shaped section 24 4 264.
Note:
Illustration similar.
RA Removing and installing automatic transmission (6HP26Z)
BMW AG - TIS
25.01.2013 18:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
