3 Series E93 325d (M57T2) CONVER
2.
Setting instruction for parking brake Bowden cables
The handbrake lever must be applied 5 times to approx. 400N
actuating force.
2.1 On brake analyzer
0th tooth (handbrake released):
Vehicles with manual transmission: Shift lever in neutral
position.
Vehicles with automatic transmission: Selector lever in "N"
position.
-
Without locking differential
≤
150 N.
-
With locking differential
≤
200 N (possibly odd display).
1st tooth: No increase in braking force with regard to 0th tooth.
Indicator lamp can be lit.
2nd tooth: Indicator lamp must be lit.
3rd tooth: Increase in braking force.
5th tooth: The brake force display must have reached
≥
400 N.
Checking brake force differential at wheel:
Apply handbrake until a wheel circumferential force (brake force
display) of min. 1000 N is reached.
Max. permitted brake force differential right/left
≤
35 % (referred
to greater brake value).
3.
Braking in the duo-servo parking brake
The following braking-in procedures are applicable in case of
insufficient braking effect or after replacing brake disks and/or
brake shoes.
3.1 On brake analyzer
Apply handbrake lever until wheel circumferential force on first
wheel is 800 N.
Lock lever in next lower tooth.
Release handbrake lever after approx. 2 minutes.
RA Adjusting handbrake
BMW AG - TIS
25.01.2013 22:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -