3 Series E93 325d (M57T2) CONVER
41 00 ...
Position of shaped parts for cavity acoustic baffle
Cavity sealing is carried out in specific body areas in order to reduce internal noise and to reduce condensate. To do
this, shaped parts are inserted in the cavities. These shaped parts adapt themselves optimally due to heating of the
body to approx. 180
°
C by expansion to the shape of the cavities.
Because it is not possible to heat the body to this extent for a body repair, a different procedure has been specified for
this situation.
RA Position of shaped parts for cavity acoustic baffle
BMW AG - TIS
26.01.2013 00:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
