3 Series E93 325d (M57T2) CONVER
Important!
Ignition key (1) must insert into lock cylinder (3) otherwise
lock cylinder (3) will be destroyed during removal.
Break open catches (2) if necessary and pull out lock cylinder (3)
with vehicle key (1).
Important!
Ignition key (2) must insert into lock cylinder (1) otherwise
lock cylinder (3) will be destroyed.
Installation:
Lock cylinder (1) must be in the pictured position.
Journal (3) of eccentric cap (4) must be in the pictured position on
lock (5).
Push lock cylinder (1) with ignition key (2) into lock (5) in this
position only.
RA Removing and installing/replacing lock for right glovebox
BMW AG - TIS
26.01.2013 01:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -