3 Series E93 325d (M57T2) CONVER
Tighten screws (1) with special tool 51 3 310 .
Tightening torque 51 32 1AZ
.
Remove special tool 51 3 010 from door window glass.
Open door window and remove special tool 51 0 320 .
Top edge of door window (1) must be adjusted parallel to
contour (2) of water drain.
Seals on A-pillar and on retractable hardtop must not be
damaged.
When the glass is retracted into the seals, the seals must not
distorted.
Ideal adjustment, pretension:
Close door until door lock closes in first catch.
In this door position, top edge of door window glass (1) must rest
on door seal (2).
It must be possible to pull out the paper strip with moderate friction
resistance.
Lock door lock with door open. Lean door against striker.
Check freedom of movement to A-pillar strip and to roof shell strip,
door window glass must not touch either strip.
Close door until door lock closes in first catch.
Door window (1) must rest lightly against seal (2) (Fig. A).
Important!
Door window (1) must enter seal (weatherstrip) (2) correctly.
Seal (3) must not be trapped while closing the window (1)
(Fig. B).
RA Adjusting left or right front door window glass
BMW AG - TIS
26.01.2013 03:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -