3 Series E93 325d (M57T2) CONVER
Unfasten thigh support and pull completely towards front.
Lever welt (1) out of thigh support.
Turn thigh support (1) over.
Detach trim wire from metal lugs.
Version with seat heater and/or with seat occupancy detector
(OC3 mat):
Release the corresponding plug connections depending on the
version and disconnect.
Detach cable tie.
Pull seat cover (1) with support forward a little and feed
cable (2) out.
Remove seat cover (1) with support towards front/top.
Important!
Feed the wiring harness carefully through the seat and
backrest mechanism as the edges of the frame can be sharp.
Release all retainers in marked areas.
RA Replacing cover for left or right front seat
BMW AG - TIS
26.01.2013 10:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -