bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Adjusting Rear Roof Shell|Page 1971 > < 1 RA Procedure For Folding Roof After An Accident
Page 1
background image

54 37 ...

Adjusting rear roof shell

Necessary preliminary tasks:

Convertible top compartment lid must be correctly adjusted

Open convertible top until screws are accessible.

Important!

Lock barrel screws with a flat wrench without fail.

Barrel screws on roof shell must not move out of position.

Slacken screws (1) on left and right (do not unscrew completely).

Slacken screw (1) on left and right (do not unscrew completely).

Close convertible top.

Carefully press roof shell at convertible top compartment lid.

Press roof shell until:

a uniform gap dimension and

lower edge parallel with convertible top cover

are obtained over the entire length.

Hold roof shell in position while screwing down.

Note:

Carry out this operation on the left and right sides in succession.

RA  Adjusting rear roof shell

BMW AG - TIS

26.01.2013  10:19

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Adjusting Rear Roof Shell|Page 1971 > < 1 RA Procedure For Folding Roof After An Accident