3 Series E93 325d (M57T2) CONVER
Disconnect all cable ties.
Installation:
Replace faulty cable ties.
Feed hydraulic line (1) with hydraulic cylinder out of wiring
harness (2).
Installation:
Make sure hydraulic line is correctly routed behind wiring harness.
Close rear lid.
Release left and right screws (1).
Remove locating cover (2) on left and right.
Note:
Operation not absolutely necessary, only if roof module still has to
be subsequently moved.
Secure metal plate (1) over Hall sensor in left mounting
cover (2).
Metal plate (1) simulates a closed luggage compartment partition.
RA Removing rear module
BMW AG - TIS
26.01.2013 10:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
