3 Series E93 325d (M57T2) CONVER
63 21 180
Removing and installing/replacing left or right
rear light (in side panel)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Release rotary clip (1) and remove cover (2).
Disconnect plug connection (1).
Unscrew nuts (2). Tightening torque 63 21 1AZ
.
Remove rear light (3) in outwards direction from side panel.
Installation:
Make sure gap is uniform all round between rear light (3) and
side panel.
Observe tightening sequence, first inside then outside.
Replacement:
If necessary, remove bulbs.
RA Removing and installing/replacing left or right rear light (in side panel)
BMW AG - TIS
26.01.2013 12:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -