3 Series E93 325d (M57T2) CONVER
64 11 208
Replacing heater core
Important!
Determine manufacturer of installed heater (Denso or Behr)
before ordering spare parts!
Remove trim panel for pedal assembly.
Necessary preliminary tasks:
•
Remove heater/air conditioner
Release screws (1).
Slide rubber grommet (1) with foam seal forward slightly.
Carefully feed pipe holder (3) with pipes (4) past rubber
grommet (2).
Installation:
If necessary, replace rubber grommet (1) and/or foam seal.
Make sure rubber grommet (1) is correctly seated on pipe
holder (3).
If necessary, remove coolant hose (2).
Release screws (3) and remove cover.
Note:
Diesel version only:
Unfasten plug connection (1) and disconnect.
Withdraw electric auxiliary heater (4) in direction of arrow.
Remove heater (5) from heater/air conditioner (6).
RA Replacing heater core
BMW AG - TIS
26.01.2013 13:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -