3 Series E93 325i (N53) CONVER
61 21 010
Removing and installing or replacing battery
Warning!
Observe safety instructions for handling vehicle battery.
Notes and instructions on Intelligent Battery Sensor IBS.
Important!
Do not under any circumstances pull/lever safety battery
terminal off by force.
Necessary preliminary tasks:
•
Remove battery cover
•
Disconnect battery negative lead
•
Remove distribution box
Open positive terminal cover (1) and slacken nut beneath.
Tightening torque 61 21 1AZ
.
Detach safety battery terminal (2) towards top, lay to one side
and secure.
Detach vent (3) in direction of arrow.
Release threaded pin (4) and remove with holder.
Lift out battery (5) by handles (6).
Installation:
Make sure battery is correctly seated in associated fixture.
Replacing version with intelligent battery sensor (IBS):
•
Read out fault memory, clear if necessary
•
Register battery replacement
Battery registration can only be carried out with the
BMW diagnosis system.
Function selection:
-
Service functions
-
Body
-
Power supply
RA Removing and installing or replacing battery
BMW AG - TIS
03.02.2013 21:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -