3 Series E93 328i (N51) CONVER
13 71 000
Removing and installing/replacing intake filter
housing (N51)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Only when replacing housing:
Remove air-mass flow sensor
Unlock plug (1) and remove.
Release clamp and detach air intake hose (2).
Unlock intake duct (1) sideways and detach.
Release screws.
Remove intake filter housing (2) towards top.
Note:
Check stored fault messages.
Now clear the fault memory.
RA Removing and installing/replacing intake filter housing (N51)
BMW AG - TIS
04.02.2013 20:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
